Previous month:
September 2017
Next month:
November 2017

October 2017

Spooky Cat Halloween Diorama Card

Spooky Cat Diorama Card

This is the card I created for our one-year old Granddaughter for Halloween.

It's a diorama card created using the new Cat punch and Spooky Night Designer Series Paper from Stampin' Up!

Making a diorama card is easy to do following my instructions found HERE.

For this card, I let the Spooky Night DSP do most of the work.  The background inside the diorama, the card front, the edge panels, the cat, and even the pumpkins are all patterns found in the paper stack.

Happy Halloween!

Spooky Cat Diorama Card close up

 

Cat Punch

Cat Punch

Spooky Night Designer Series Paper

Spooky night dsp

Supplies Used:

Stamp Set: none

Ink: none

Paper: Basic Black, Spooky Night Designer Series Paper

Accessories: Cat Punch, Big Shot, Circles Framelits Dies, Tear and Tape adhesive, Crushed Curry baker's twine, rhinestone, Mini Dimensionals, Glue Dot

Happy Stampin'!

Faux Metal Lovely as a Tree

Faux Metal Lovely as a TreeLovely as a Tree is one of my all-time favorite stamp sets.  It is one of the first stamp sets I purchased when I started stamping many moons ago. 

I think it is the oldest set found in the SU! Annual Catalog. 

I hold my breath every year when the retiring list is published, and I breathe a sigh of relief when I see that it is not on that list!

For this card, I combined Lovely as a Tree with the Faux Metal Technique. 

Perfect for a fall-themed card!

Also perfect for those sometimes hard to create masculine-themed cards too!

The Faux Metal Technique is very easy to do.

You will need a Versamark pad, embossing powder, heat tool and a stamp.

That's it!

Here's how:

1.  Ink up your stamp with Versamark and set it aside.  This is an important step.  The Versamark protects the rubber from the melted embossing powder in the last step.

2. Dab Versamark ink onto a piece of Whisper White card stock.  Pour embossing powder over the Versamark, and heat emboss using a heat tool.  For this card, I used copper embossing powder.

3. Repeat that step 2 more times.  On the third time, make sure the embossing powder is melting and flowing, like melted wax.

4. Quickly remove the heat from the card stock, and stamp your preconditioned stamp into the melted embossing powder.  Lift the stamp, and your image should be burnished into the embossing powder.  It's  the same principle as wax sealing an envelope. 

5. If you don't like the image, simply add more heat to the embossing powder, so it is melted and flowing and try again.  Remember to condition your stamp with Versamark before stamping.

6. Swipe Embossing Buddy over piece of Perfect Plum card stock.  Stamp leaves and pine cones from Lovely as a Tree using Versamark ink.  Heat emboss using copper embossing powder. 

7. Dab edges of Perfect Plum into Versamark and heat emboss using copper embossing powder.

8.  Attach to front of Whisper White card base.  Attach Faux Metal piece to front of card base , popping it up using Dimensionals.

9. Stamp greeting from Teeny Tiny Wishes using Elegant Eggplant to complete.

I  hope you'll give it a try and will share your creations with me.

Lovely as a Tree, timeless tree images!

Lovely as a tree

 

 

Supplies Used:

Stamp Sets: Lovely as a Tree, Teeny Tiny Wishes

Ink: Versamark, Elegant Eggplant

Paper: Whisper White, Perfect Plum

Accessories: Embossing Buddy, heat tool, copper embossing powder, Mini Dimensionals

Happy Stampin'!

Woodland Embossing Folder Watercolor Background

IMG_5888

It's easy to create watercolor backgrounds using the Big Shot and Woodland Textured Embossing Folder.

This is the card I created after creating this 3D Woodland embossed card found HERE.

To create the background for this card, I simply spritzed the inside of the embossing folder with water like I was cleaning the ink from the inside. 

The ink pooled and began to run.   I inserted a piece of Whisper White card stock and ran it through the Big Shot.

Now the colors are behind the embossed image.

To fill in the spaces, I stamped the small leaf image from Sheltering Tree using Crushed Curry and Tangerine Tango inks.  I colored in the lines on the bark using my Early Espresso marker.

To see my other 3D Woodland Embossing Folder creations, along with a step by step tutorial, please visit my page HERE.

So, before you clean up, try creating another card.  The look will be slightly different than the original!

Woodland Textured Embossing Folder

Woodland embossing folder

Shop online 24/7:

Online ordering

Supplies Used:

Stamp Sets: Sheltering Tree, Eastern Beauty

Ink: Crushed Curry, Tangerine Tango, Tranquil Tide, Early Espresso marker

Paper: Tangerine Tango, Early Espresso, Whisper White, Crushed Curry

Accessories: Big Shot, Woodland Textured Embossing Folder, spritzer bottle filled with water, Crumb Cake seam binding (retired), 1" and 1 1/4" circle punches, Mini Dimensionals

Happy Stampin'!

3D Stamping with Woodland Embossing Folder

Woodland Embossing Folder 3D stamping

Be sure to check out my other 3D Woodland Embossing Folder projects Here.  There's a link to full instructions in a pdf format!

I live in the mountains of southern Colorado, and in the fall, this is the view from my front window. 

Aspens and their changing leaves!

Aspens

Great inspiration for my card using the Woodland Textured Embossing Folder.

You can view full instructions using the link above, but here's a short version.

I stamped the large leaves image found in Sheltering Tree on the inside of the Woodland embossing folder using Crushed Curry, Tangerine Tango, and Tranquil Tide inks.  I also colored in the lines of the tree bark using my Early Espresso marker.  Then, I inserted a piece of Whisper White card stock into the folder and embossed it using the Big Shot.  The leaves are now behind the embossed image.  To fill in spaces, I stamped the small leaf image from Sheltering Tree using the same inks.

The greeting is from Eastern Beauty stamped in Tangerine Tango onto a piece of Whisper White card stock, cut out using my 1" circle punch and then layered to a piece of Tranquil Tide punched out using my 1 1/4" circle punch.

It's easy to create 3D stamped images using the Big Shot and Woodland Textured Embossing Folder.

Woodland Textured Embossing Folder

Woodland embossing folder

 

Online ordering

 

Stamp Sets: Sheltering Tree, Eastern Beauty

Ink: Crushed Curry, Tangerine Tango, Tranquil Tide, Early Espresso marker

Paper: Crushed Curry, Early Espresso, Whisper White, Tranquil Tide

Accessories: Big Shot, Woodland Embossing Folder,  1" and 1 1/4" circle punches, 5/8" Burlap Ribbon, candy dots, sponge, Mini Dimensionals

 

 

Happy Stampin'!

Paper Pumpkin Embossed Layered Leaves

Paper Pumpkin Layered Leaves

Fall has arrived here in the mountains of southern Colorado!

To celebrate, I created this quick and easy card using textured embossing folders and elements of the September Layered Leaves Paper Pumpkin kit.

What is Paper Pumpkin?

Paper Pumpkin is Stampin' Up!'s monthly crafting subscription.

Every month, you'll receive a box of goodies from Stampin' Up! filled with all the necessary ingredients to make a fun project. 

It might be greeting cards or 3D projects like gift boxes and pouches.

The design is already created for you.  Just follow the instructions, and you'll be crafting in a matter of minutes.

September's kit was called Layered Leaves which included a great collection of leaf stamps and die cuts.

I decided to change it up a little bit and create my own design using pieces of the kit.

Here's how:

  1. Emboss piece of Whisper White card stock using the Big Shot and Woodland embossing folder.  Emboss piece of Cajun Craze card stock using the Big Shot and Brick Wall embossing folder.
  2.  Attach embossed pieces, and wrap a piece of 5/8" burlap ribbon along the seam line, attaching it to the back.
  3. Attach to Crumb Cake card base.
  4. Pop out leaf die cuts from Layered Leaves Paper Pumpkin kit.  Stamp large leaf image onto large leaf die cut using Early Espresso ink.  Stamp 3 smaller leaf images onto coordinating leaf die cut using Early Espresso ink.  Pop out pre-stamped Soft Suede leaf die cut.
  5. Layer leaves to front of card using Dimensionals to pop them up.
  6. Tie a bow out of metallic copper twine from Paper Pumpkin kit and attach to front of card using a glue dot.

Done!  I let Paper Pumpkin do most of the work for me.

Check out Paper Pumpkin subscriptions HERE

To start receiving Paper Pumpkin kits beginning in November, be sure to subscribe by Nov 10!

Supplies Used:

Stamp Set:  Layered Leaves (if you don't have Layered Leaves Paper Pumpkin kit, the Vintage Leaves stamp set and coordinating Leaflets Framelits Dies will work just as well)

Ink: Early Espresso

Paper: Crumb Cake, Whisper White, Cajun Craze

Accessories: Layered Leaves Paper Pumpkin Kit, Big Shot, Woodland and Brick Wall Textured Embossing Folders, 5/8" Burlap Ribbon, Mini Dimensionals, glue dots

Happy Stampin'!

Fresh Card Making Idea-Iris Folded Caramel Kiss

Iris Folded Carmel Kiss

Iris Folding is one of my all-time favorite card making techniques!

And an Iris Folded Kiss is perfect for upcoming fall-themed events, including Halloween.

Change up the colors, and it is also perfect for a Valentine's Day or anniversary project!

What is Iris Folding?

Iris Folding is a paper craft that involves strips of colored paper placed in such a way to form a spiraling design. 

The center forms an iris, similar to the shape of a camera lens.

And it is easy to do!

All you need is an iris folding pattern and pretty papers.

Want to learn more?

This technique will be featured in my Fresh Card Making Ideas edition which will hit e mail inboxes on October 17.

Please be sure to sign up for my mailing list by 8:00 am on October 17 to receive this free tutorial, complete with step-by-step instructions and color photos.

Don't miss out.  Sign up today!

 

Happy Stampin'!

Spooky Cat Candy Kisses Treat Holders

Spooky Cat Kisses Treats

Just in time for Halloween!

Cute Spooky Cat Kisses candy treat holders.

I created these feline treats in a matter of minutes using the Cat Punch and Spooky Night Designer Series Paper from Stampin' Up!

They just make me smile! 

Love the "calico," "tortoise shell," and "orange tabby" inspired cats.  The solid black cat looks like my cat, Black Bart, aka Black Biscuits. 

Black Bart has golden eyes though.  I guess I should have colored in the eyes using a marker!

This project is super simple!

(Thanks to Paper Pixie for the original instructions!)

Spooky Cat Kisses Treats scoring

Start with a piece of card stock measuring 4" x 1".  Score at 1", 2", and 3".

Spooky Cat Kisses Treats triangle

Fold along the score lines to form a triangle.  Apply glue and secure triangle closed.  For this project, I used Tombow Multi-purpose Liquid Glue.  Fine Tip Glue will work as well.  SNAIL probably won't hold the triangle together.

Spooky Cat Kisses Treats with Kiss inside

Slip Kisses candy inside the triangle.

 

  Spooky Cat Kisses Treats side one punched cat

You will need 2 punched cats, one for each side of the triangle. 

For the front side, I punched a black cat out one of the designs found in Spooky Night Designer Series Paper.

You could also stamp the cat image that comes in the Spooky Cat stamp set.

I liked how the cat was already printed on the paper, so I let the DSP do the work for me.

Attach the cat to one side of the triangle. Place the cat up a little bit, so it doesn't interfere with the  base of the triangle.

Spooky Cat Kisses Treats punched cat

For the back side of the triangle, I punched a cat out of a scrap piece of Basic Black card stock.

Apply glue to the bottom of the cat's body, the tip of the tail and the top of the head, including the ears.

Spooky Cat Kisses Treats two cats secured

Attach the solid cat to the back side of the triangle, lining it up with the ears and tail of the cat on the front.  Pinch the top and the tail together, holding them in place while the glue dries.

Spooky Cat Kisses Treats complete

To complete, tie a bow around the cat's neck and add a rhinestone jewel as a tag.  I used Crushed Curry and Black Baker's Twine out of my stash.

So easy, and a perfect project idea for Halloween!

You could quickly make up several of these to give to co-workers and friends or share at upcoming adult or children's Halloween parties.

Shop online Cat Punch

Cat Punch

Shop online Spooky Night Designer Series Paper

Spooky night dsp

Supplies Used:

Paper: Spooky Night Designer Series Paper, Basic Black, Pumpkin Pie card stock

Accessories: Cat Punch, Multi-purpose Liquid Glue, Baker's Twine, rhinestone, Kisses candy

 

Happy Stampin'!

Wood Words, Wood Crate Thank You Gifts

Wood Words Candy CratesAre you ever in the need for quick and easy thank you gifts?

Me too!

Recently, I needed to create thank you gifts for attendees for an upcoming class.

I got out my Big Shot,  Wood Crate Framelits Dies, and assorted sheets of Wood Texture Designer Series Paper and created these cute crates in a matter of minutes!

I stamped the greeting from Wood Words using Cajun Craze ink and cut out the tag using the Big Shot and coordinating Wood Crate Framelits Die.

I added a heart from the Hearts and Stars Elements to complete the look.

Then, I filled the crates using shredded paper and filled them with an assortment of candy.

Wood Words Candy Crates close up

The Wood Words stamp set and Wood Crate Framelits Dies can be purchased separately. 

But, if you purchase the Wood Words Bundle, you'll save 10%!

For more ideas using the Wood Words Bundle, please be sure to watch this video from Stampin' Up!

Wood Words Video

Supplies Used:

Stamp Set: Wood Words

Ink: Cajun Craze

Paper: Wood Texture Designer Series Paper (you need 2 sheets to put together 1 crate), Very Vanilla

Accessories: Big Shot, Wood Crate Framelits Die, Tear and Tape Adhesive, Hearts and Stars Elements, Glue Dots, shredded paper, candy

 

 

 

Happy Stampin'!